Tenda Wireless AX Dual Band Gigabit Ceiling Access Point 3000Mbps i27 254xClients

i29 is designed based on the new Wi-Fi 6 technology. It realizes a bandwidth of 160 MHz and a 5 GHz rate as high as 2.4 Gbps, a rate three times higher than that of ordinary Wi-Fi 5 APs and two times that of ordinary Wi-Fi 6 APs. The application of such new technologies as OFDMA, spatial multiplexing, and MU-MIMO drives the network capacity of a single i29 to 4 times higher. The high-power RF design helps maintain the quality of Wi-Fi signal even over a long distance, so that wireless clients and AP can work under the high-performance Wi-Fi 6 mode. i29 is a perfect choice for such locations as businesses and hotels to deploy high-performance Wi-Fi networks. Ethernet Interface: One 10/100/1000 Mbps Ethernet Port, One 10/100/1000 Mbps Ethernet Port (PoE) Antenna: 4 x 4 dBi LED Indicator: RGB Maximum Power Consumption: 15.74 W Power supply standard: IEEE 802.3at PoE Frequency Band: 2.4 GHz, 5 GHz Data Rate: 2.4 GHz data rate:1-574 Mbps, 5 GHz data rate:6-2402 Mbps Wireless Standard: IEEE 802.11a/b/g/n/ac/ax Channel width: 20 MHz/40 MHz/80 MHz/160 MHz Max Transmit Power: 2.4 GHz Max. output power:29+/-1.5 dBm, 5 GHz Max. output power:29+/-1.5 dBm Sensitivity: 802.11b RX sensitivity:-97 dBm, 2.4 GHz 802.11n (MCS7) RX sensitivity:-75 dBm, 5 GHz 802.11a RX sensitivity:-95 dBm, 5 GHz 802.11n (MCS7) RX sensitivity:-75 dBm MU-MIMO: 2X2 MU-MIMO Operating Mode: AP Max. No. of SSID: 2.4 GHz: 7, 5 GHz: 4 Max. connected clients: 254 Supported WEP, Fast Roaming, TWT, Beamforming, OFDMA Operation Temperature: -10℃ - 45℃ Dimension: 250.6*55 mm