DIMM DDR4 32GB (2x16GB kit) 3200MT/s KF432C16BWAK2/32 Fury Beast RGB Special Ed.

DIMM DDR4 32GB (2x16GB kit) 3200MT/s KF432C16BWAK2/32 Fury Beast RGB Special Ed. DESCRIPTION SPECIFICATIONS KF432C16BWAK2/32 32GB (16GB 2G x 64-Bit x 2 pcs.) DDR4-3200 CL16 288-Pin DIMM Kit Continued >> FEATURES Kingston FURY KF432C16BWAK2/32 is a kit of two 2G x 64-bit (16GB) DDR4-3200 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 2G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Total kit capacity is 32GB. Each module has been tested to run at DDR4-3200 at a low latency timing of 16-20-20 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows: CL(IDD) Row Cycle Time (tRCmin) Refresh to Active/Refresh Command Time (tRFCmin) Row Active Time (tRASmin) UL Rating Operating Temperature Storage Temperature 17 cycles 45.75ns(min.) 350ns(min.) 32ns(min.) 94 V - 0 0 o C to +70 o C -40 o C to +85o C FACTORY TIMING PARAMETERS • Default (JEDEC): DDR4-2400 CL17-17-17 @ 1.2V • XMP Profile #1: DDR4-3200 CL16-20-20 @ 1.35V • XMP Profile #2: DDR4-3000 CL16-19-19 @ 1.35V • Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • On-Die termination (ODT) • 16 internal banks; 4 groups of 4 banks each • Bi-Directional Differential Data Strobe • 8 bit pre-fetch • Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop) • Height 1.80” (45.8mm), w/heatsink