Elegoo Water Washable Resin 1kg Black

ELEGOO Water Washable Photopolymer Resin is compatible with the most LCD 3D printers using the 405nm wavelength light source. It’s specifically designed for LCD/LED light source to achieve better printing quality. Instead of using IPA to clean up the prints, you can use tap water to wash the prints. This product comes with four features: Amazing Detail No Expensive cleaners Water washable. No detergent or alcohol required and can clean any residual stains directly with water. The water that washed the water washable resin models can not be poured directly into the sewer or sink. It should be placed under the sunlight to completely cure the remainIng resin in the water before processed to avoid environment pollutioin. Printing Setting: (For Mars) Bottom Exposure: 60s Normal Exposure: 8s Resin Parameters: Hardness: 80-85 D; Viscosity (25°C): 100-350 mPa·s Liquid Density: 1.05-1.25 g/cm³ Solid Density: 1.05-1.25 g/cm³ Volumetric shrinkage: 3.72-4.24 % Flexure Strength: 40-70 Mpa Extension Strength: 30-52 Mpa Shelf Life: 2 year Precautions: Shake well before use Recommended temperature 20°C - 25°C Always wear gloves and mask to avoid direct skin contact Keep away from children, dust and direct sunlight Wash with plenty of water immediately if you get direct skin contact with resin