Elegoo Water Washable Resin 1kg Ceramic Grey
Има на залиха
3.280 ден.
ДДВ 18% (вклучен во цената)
Последна промена на цена/залиха: 15-10-2024
КОД: 1002704
1-3 дена
Elegoo Water Washable Resin 1kg Ceramic Grey
ELEGOO Water Washable Photopolymer Resin is compatible with the most LCD 3D printers using the 405nm wavelength light source. It’s specifically designed for LCD/LED light source to achieve better printing quality. Instead of using IPA to clean up the prints, you can use tap water to wash the prints.
This product comes with four features:
Amazing Detail
No Expensive cleaners
Water washable. No detergent or alcohol required and can clean any residual stains directly with water.
The water that washed the water washable resin models can not be poured directly into the sewer or sink. It should be placed under the sunlight to completely cure the remainIng resin in the water before processed to avoid environment pollutioin.
Printing Setting: (For Mars)
Bottom Exposure: 60s
Normal Exposure: 8s
Resin Parameters:
Hardness: 80-85 D;
Viscosity (25°C): 100-350 mPa·s
Liquid Density: 1.05-1.25 g/cm³
Solid Density: 1.05-1.25 g/cm³
Volumetric shrinkage: 3.72-4.24 %
Flexure Strength: 40-70 Mpa
Extension Strength: 30-52 Mpa
Shelf Life: 2 year
Precautions:
Shake well before use
Recommended temperature 20°C - 25°C
Always wear gloves and mask to avoid direct skin contact
Keep away from children, dust and direct sunlight
Wash with plenty of water immediately if you get direct skin contact with resin
Категорија | Филаменти |
---|---|
Brand | Elegoo |
Part Number | NULL |
Повеќе продукти од Elegoo
Слични продукти
-
Icon
Бесплатна достава
за нарачки над 3000 ден.
-
Icon
Поддршка 24/7
Онлајн достапни 24 hours
-
Icon
ПОВРАТ НА СРЕДСТВА
100% гаранција
-
Icon
Плаќање
Безбедно онлајн плаќање