SODIMM Notebook Memory Kingston 4GB CL22 DDR4 3200MHz 1.2V 1Rx16

4GB 1Rx16 512M x 64-Bit PC4-3200 CL22 260-Pin SODIMM FEATURES This document describes ValueRAM's KVR32S22S6/4 as a 512M x 64-bit (4GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows: SPECIFICATIONS: CL(IDD) - 22 cycles Row Cycle Time (tRCmin) - 45.75ns(min.) Refresh to Active/Refresh Command Time (tRFCmin) - 32ns(min.) Row Active Time (tRASmin) - 32ns(min.) UL Rating - 94 V - 0 Operating Temperature - 0o C to +85o C Storage Temperature - -55o C to +100o C FEATURES: • Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Single-rank • On-board I2 serial presence-detect (SPD) EEPROM • 8 internal banks; 2 groups of 4 banks each • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) • Selectable BC4 or BL8 on-the-fly (OTF) • Fly-by topology • Terminated control command and address bus • PCB: Height 1.18” (30.00mm) • RoHS Compliant and Halogen-Free