SODIMM Notebook Memory Kingston 8GB CL19 DDR4 2666MHz 1.2V KVR26S19S6/8

KVR26S19S6/8 8GB 1Rx16 1G x 64-Bit PC4-2666 CL19 260-Pin SODIMM DESCRIPTION This document describes ValueRAM's KVR26S19S6/8 as a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 1G x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows: FEATURES • Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Single-rank • On-board I2 serial presence-detect (SPD) EEPROM • 8 internal banks; 2 groups of 4 banks each • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) • Selectable BC4 or BL8 on-the-fly (OTF) • Fly-by topology • Terminated control command and address bus • PCB: Height 1.18” (30.00mm) • RoHS Compliant and Halogen-Free SPECIFICATIONS CL(IDD) - 19 cycles Row Cycle Time (tRCmin) - 45.75ns(min.) Refresh to Active/Refresh - 350ns(min.) Command Time (tRFCmin) Row Active Time (tRASmin) - 32ns(min.) UL Rating - 94 V - 0 Operating Temperature - 0o C to +85o C Storage Temperature - -55o C to +100o C