DIMM 16GB DDR4 2666MHz Kingston CL19 1R x8

16GB Module - DDR4 2666MHz Part Number: KVR26N19D8/16 Specs: DDR4 , 2666MHz , Non-ECC , CL19 , 1.2V , Unbuffered , DIMM DESCRIPTION This document describes ValueRAM's KVR26N19D8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows: FEATURES: • Power Supply: VDD=1.2V Typical • VDDQ = 1.2V Typical • VPP - 2.5V Typical • VDDSPD=2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Dual-rank • On-board I2 serial presence-detect (SPD) EEPROM • 16 internal banks; 4 groups of 4 banks each • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) • Selectable BC4 or BL8 on-the-fly (OTF) • Fly-by topology • Terminated control command and address bus • PCB: Height 1.23” (31.25mm) • RoHS Compliant and Halogen-Free SPECIFICATIONS: CL(IDD) - 19 cycles Row Cycle Time (tRCmin) - 45.75ns(min.) Refresh to Active/Refresh Command Time (tRFCmin) - 350ns(min.) Row Active Time (tRASmin) - 32ns(min.) Maximum Operating Power - TBD W* UL Rating - 94 V - 0 Operating Temperature - oC to +85oC Storage Temperature - -55oC to +100oC